3mm LED Specifications Explained: Size, Voltage and Applications
1. Basic Specifications of the 3mm LED
The 3mm LED, known in the industry as F3, is a through-hole LED with a 3mm epoxy lens. It is the mainstream choice for small panel indicators: one size smaller than the 5mm (F5), allowing denser rows and less board space, while remaining easier to insert and solder than SMD parts. It is used heavily on industrial control panels, small home appliances and toys.
A standard F3 is built with a round epoxy lens, an internal lead frame, a die and gold wire, plus two leads at the bottom — the long one positive, the short one negative. The lens diameter is 3mm, overall height about 5.3mm, and the standard lead length is around 25mm; leads can be trimmed or bent 90°. Rated operating current is 20mA and single-unit power about 0.06W, exactly the same as 5mm — the only difference is the emitting surface size.
Why has the F3 never been displaced by SMD? First, for low-volume products through-hole assembly has a low process threshold and is easy to repair. Second, the 3mm size is convenient for panel drilling, and once the LED protrudes through the panel it is more recognizable than an SMD part with a light pipe. Many products designed over a decade ago still specify F3 for indicator positions, the supply chain is mature and stable, and there is no reason to change.
For environmental compliance, F3 lenses are epoxy encapsulated, and products from reputable manufacturers meet RoHS requirements, so they are safe to use in export orders.
2. 3mm vs 5mm vs 8mm Side by Side
| Size | Lens Diameter | Overall Height | Operating Current | Typical Uses |
|---|---|---|---|---|
| 3mm (F3) | 3mm | ~5.3mm | 20mA | Dense indicator rows, small panels, toys, numeric display companions |
| 5mm (F5) | 5mm | ~8.6mm | 20mA | Power indicators, appliance panels, industrial status lights |
| 8mm (F8) | 8mm | ~11mm | 20mA | Long-distance indication, large equipment panels |
All three share the same current rating; the choice mainly depends on the panel hole and viewing distance: use F3 for a φ3 hole and F5 for φ5 — do not mix them. For close viewing and dense rows choose 3mm; to be clearly visible from one or two meters away choose 5mm or 8mm.
One clarification: the diameters in the table refer to the lens (the light-emitting part), excluding any mounting collar. Collared versions are one size larger overall, so confirm from the drawing whether the order needs a collar or a bare LED.
3. Colors and Voltage
F3 covers a full color range: red, yellow, yellow-green, orange, blue, pure green, white and bi-color. The voltage rule is the same as other LEDs and depends on the die: red, yellow and yellow-green are roughly 1.8–2.2V, orange and amber 2.0–2.4V, and blue, pure green and white 2.8–3.4V. There are no special drive requirements — 3V, 5V and 12V systems all work with a proper current-limiting resistor.
For viewing angle, round-head versions typically offer 15°–45° focused beams; choose a diffused lens for a softer, wider glow. Derivative shapes such as the 2mm nipple-head (small flat-top cylinder) suit tighter layouts and are not covered here.
Two purchasing details are easily overlooked: first, die voltage varies by 0.1–0.2V between manufacturers even for the same color, so re-check the current-limiting resistor against measured values before volume production; second, LEDs ship in brightness bins — specify the same bin for the whole order so that a row of lit indicators looks uniform in color and brightness.
4. Which Products Use 3mm LEDs
The most typical case is dense indicator rows: an instrument panel with a dozen status lights would look crowded in 5mm, while 3mm fits just right. Next are toys and small appliances, where internal space is tight, viewing distance is short, and 3mm provides enough brightness with lower power. F3 is also used for auxiliary indication on numeric-display and dot-matrix production lines. In addition, advertising light boxes and indicator signs often use F3 as auxiliary light sources; with proper waterproofing they handle semi-outdoor conditions.
When specifying, write these down and you will not go wrong: color, voltage, brightness, viewing angle, and lead length (including whether bending is needed). If in doubt, refer to the drawings and parameters on the F3 through-hole LED (3mm indicator) product page; for special lead forms see 90° bent-lead forming customization; more sizes are listed in the through-hole LED series section.
A final warning about size swaps: if a 5mm panel feels too crowded, do not simply buy 3mm replacements — confirm the holes first. A 3mm LED in a 5mm hole will wobble and leak light, requiring a new panel or LED holders; the other way around, a 5mm LED simply will not fit a 3mm hole. Measure the hole diameter before reordering.
About Hongcheng Optoelectronics
Hongcheng Optoelectronics (Dongguan Hongcheng Optoelectronics Co., Ltd.) is a Guangyu Group member; the group has over 20 years in the optoelectronics industry. Our products use Grade-A chips and 99.99% pure gold wire bonding, are RoHS certified, and we support customization, sampling and volume quotations. Tel/WeChat: 139 2571 4318, email: sales@led-hc.com / sales@hc-led168.com.
