What LED beads are used for the charger indicator light? Selection scheme for charger indicator light
The charger indicator light needs to display two states: charging in progress (red) and fully charged (green), with dual color beads being the standard solution. The charger has strict requirements for machine power consumption, and the LED current is usually controlled within 2-5mA. Hongcheng Optoelectronics provides high brightness and low current dual color indicator LEDs for charger manufacturers.
Key points for selecting charger indicator lights
- Dual color scheme: Red and green dual color LED beads display charging status at a single position, with 5mm/3mm direct insertion being the most commonly used and cost-effective.
- Low current: Choose a 2mA high brightness model with a total power consumption of less than 10mW, meeting energy efficiency standards.
- Common Yin/Common Yang: Two color LED beads are available in two types: common Yin and common Yang. Please confirm the driving circuit before placing an order.
- Package selection: Use direct insertion for the shell outlet hole, and 0805 dual color patch for onboard indication.
- Reliability: The internal temperature of the charger is high, and models with a temperature resistance of 85 ℃ or above should be selected.
Hongcheng Optoelectronics recommends products
- 3mm bordered white misty dual color direct insertion LED beads
- 5mm Bordered White Misty Double Color Direct Insertion LED Bead
- 5mm white transparent dual color direct insertion LED beads with edges
- 5mm Bordered Green Transparent Green Light Directly Inserted into LED Beads
- 5mm Bordered Yellow Transparent Yellow Light Directly Inserted LED Beads
- 5mm Bordered Orange Transparent Orange Light Directly Inserted LED Beads
- 3mm edge green transparent emitting green light directly inserted into LED beads
- 3mm Bordered Blue Transparent Blue Light Directly Inserted into LED Beads
- 0805 dual color patch LED beads
- 0805 SMD LED beads
Frequently Asked Questions
Q: How to achieve the red green color change of the charger?
Answer: Just use a red green dual color LED bead. When charging, drive the red chip, and switch to the green chip when fully charged. For the selection of co yin and co yang, please refer toWorking principle of dual color LED beads.
Extended Reading
- Working principle and selection guide of dual color LED beads
- Recommended models of low-power LED indicator lights
- Can LED indicator lights be customized to change color and brightness?
Hongcheng Optoelectronics has been focusing on LED indicator beads for more than 20 years, with A-level chips, 99.99% gold wire packaging, RoHS environmental certification, and support for free samples and customized selection. For procurement inquiries, please contactsales@led-hc.com.
