Can LED indicator lights be customized to change color and brightness?
Conclusion: Yes, and there are more customizable dimensions than you might imagine
LED indicator beads are standardized products that can be deeply customized.Color, brightness, voltage, emission angle, external structure, and pin method can all be customized according to needsAmong them, color and brightness are the most common customization items - through chip wavelength grading and spectral color separation, the same model of LED beads can be accurately shipped within a wavelength range of ± 1nm and a brightness range of ± 10%.
List of customizable projects
| customized item | customization scope | Typical requirements |
|---|---|---|
| Color/wavelength | Red, green, yellow, blue, white, and special wavelengths, graded within ± 1nm | Brand color matching, instrument specific wavelength |
| brightness | Splitting and grading for shipment, with a consistency of ± 10% | The brightness of multiple lights on the panel is consistent |
| voltage | Low current high brightness, wide voltage design | Battery equipment, 12V/24V system |
| beam angle | Concentrate 30 ° to diffuse 140 ° | Panel spotlight indicator or wide-angle backlight |
| appearance | Ball head, flat head, matte surface, transparent, bent foot | Structural hole matching |
| Color combination | Two color, three color, RGB custom combination | Multi state single light display |
Customization process and cycle
Standard process:Request (specification sheet or sample) → Manufacturer evaluation and sampling → Sample confirmation → Batch productionCustomization of parameters such as color and brightness can usually be quickly sampled; Customization of appearance and structure (such as special bent feet and irregular packaging) requires evaluation of mold and production line compatibility. Hongcheng Optoelectronics supports customization based on drawings and samples, as well as OEM manufacturing. For regular model customization, free sample confirmation is provided.
Prepare three pieces of information before customization
1. Target parameters (color wavelength, brightness range, operating voltage and current); 2. Estimated usage (sample size and batch size); 3. Application environment (temperature, humidity, welding process). The more complete the information, the higher the pass rate of the first sample.
